The meco 2kwh portable power station is a portable unit that the listing describes as a 1200W power station with a 2048Wh LiFePO4 battery. It is aimed at Bangladeshi homes that face load shedding, small businesses that need backup for essential devices, and outdoor or job-site users who need power away from the grid.
- Overview
- Key features
- Specifications
- How to use and set up
- Compatibility and what is in the box
- Who should buy it in Bangladesh
- Alternatives in our store
- Warranty and support
- Delivery, returns and ordering
- Frequently asked questions

Overview of the meco 2kwh portable power station
According to the listing, the meco 2kwh portable power station pairs a 2048Wh LiFePO4 battery with a continuous 1200W AC output and a 2400W peak surge capability. The maker lists refrigerators, microwaves, power tools and medical equipment among the devices it can power. The listing frames the unit around load shedding, outdoor trips and remote work on job sites. Read the figures together, because the listing gives capacity, output and charging times in one place.
The listing describes the meco 2kwh portable power station as a reliable, clean and silent energy source. These are the maker’s claims, so read them as the listing’s wording. Start by listing the devices you want to keep running, their rated wattage and the total, then compare it with the continuous 1200W output the listing gives, which shows whether the meco 2kwh portable power station fits your needs.
Bangladesh has long hot and humid months, and grid supply can be uneven in many areas. The listing gives an operating temperature range of -10°C to 45°C and says the unit is built to perform reliably in various climates found across Bangladesh. Keep the meco 2kwh portable power station in a shaded, ventilated spot rather than in direct sun. For background on the broader product group, read the Wikipedia entry on consumer electronics.
Key features
Battery capacity and LiFePO4 chemistry
The listing gives the battery as 2048Wh of LiFePO4 (Lithium Iron Phosphate) capacity, shown as 64V and 32Ah. It states that LiFePO4 chemistry ensures over 3500 charge cycles to 80% capacity, and it presents this as superior longevity compared with traditional lithium-ion batteries. The listing also says the battery provides extended runtimes for critical appliances and electronics. Think of the capacity as the total energy available, and read the runtime examples as the maker’s own estimates. The meco 2kwh portable power station is best judged against the devices you plan to run, not by one figure alone.
1200W pure sine wave output and surge
According to the listing, the unit provides a 1200W pure sine wave AC output with a 2400W surge capability for demanding startup loads. The maker says this clean output is safe for sensitive electronics such as laptops, medical devices and high-end audio equipment. The listing also names refrigerators, microwaves and power tools among the devices the meco 2kwh portable power station can run. When you switch on several appliances, add up their rated wattage and keep the continuous total within 1200W. Check the 2400W surge figure against any device with a demanding startup load.
Multiple output ports
The listing names 2 x AC outlets, 1 x car port, 2 x DC5521 ports, 2 x USB-A ports (12W), 2 x USB-A Quick Charge 3.0 ports (18W) and 2 x USB-C PD 100W ports. The maker presents this mix as ensuring compatibility with virtually any device.
In a Bangladeshi home, phones and laptops can charge from USB while a fan or Wi-Fi router runs from the AC outlets. Match each device with the right port and cable, and keep the car port and DC ports for devices with matching plugs. Several choices at once help when more than one person needs power from the meco 2kwh portable power station.
Charging at home, on solar and from a car
The listing says AC wall charging reaches full in about 2 hours, with a maximum input of 1100W. Solar charging is listed at up to 500W, reaching full in about 4 to 5 hours under optimal sunlight, with a solar input range of 12 to 60V, 10A.
Car charging is listed at 12V/24V, 8A maximum, with a full charge in about 20 to 22 hours. The solar panels are sold separately. For a Dhaka flat, the wall socket is the simplest way to top up the meco 2kwh portable power station between outages, while solar suits outdoor use with good sunlight.
Uninterruptible power supply function
The listing describes an uninterruptible power supply (UPS) function with a switchover time under 20ms. The maker positions the unit as an emergency UPS that protects sensitive electronics from sudden power interruptions in Bangladesh.
That is relevant for sensitive electronics that must not lose power during a short outage, as the listing describes. The listing does not explain how the function responds to every connected device, so plan the setup around your most sensitive equipment. The meco 2kwh portable power station is presented as a backup for sudden interruptions, not as a replacement for every form of power protection.
Smart LCD display, app control and LED light
The listing describes a smart LCD screen that shows battery status, input and output wattage and remaining runtime. The listing says it connects via Bluetooth or Wi-Fi for remote control and monitoring through a dedicated mobile app. The built-in LED light is listed with multiple modes, including SOS, for emergencies or outdoor illumination. These features are listed as ways to monitor the meco 2kwh portable power station during a long outage. Follow the maker’s instructions to pair the app.

Specifications
The table below lists the specifications for the meco 2kwh portable power station as they appear in the product listing. Use it to compare the listed capacity, output and charging figures with the devices you plan to run, and to see how each figure relates to your own load.
| Specification | Value |
|---|---|
| Model | Meco P2000 Pro |
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Capacity | 2048Wh (64V, 32Ah) |
| AC Output | 2 x 230V AC, 50Hz, 1200W (Pure Sine Wave, 2400W Peak) |
| AC Input (Wall) | Max 1100W (Full charge in ~2 hours) |
| Solar Input | Max 500W (12-60V, 10A) (Full charge in ~4-5 hours) |
| Car Charging Input | 12V/24V, 8A max (Full charge in ~20-22 hours) |
| Cycle Life | 3500+ Cycles to 80% Capacity |
| UPS Function | Yes (<20ms switchover) |
| Connectivity | Bluetooth, Wi-Fi (App Control) |
| LED Light | Yes, with multiple modes (Normal, Bright, SOS) |
| Operating Temperature | -10°C to 45°C (14°F to 113°F) |
| Dimensions (L x W x H) | 42.5 cm x 28.5 cm x 35.8 cm |
| Weight | 23.5 kg |
These are listed specifications from the product listing for the meco 2kwh portable power station.

How to use and set up the meco 2kwh portable power station
Start by reading the maker’s instructions from start to finish. As a general step, charge fully before first use, so plan that first charge for a time when the unit can stay plugged into a wall socket. Place the meco 2kwh portable power station on a flat, dry surface with room around it, away from direct heat.
After the first full charge, connect one device at a time. Start with a low-wattage item, see how the unit responds, and then add the next device. Keep the continuous 1200W output in mind, and note that the listing gives 2400W only as a peak surge figure for startup loads, so do not plan steady running loads around it. This habit helps you learn how the meco 2kwh portable power station behaves with your own equipment.
If you plan to use the app, follow the maker’s instructions to connect over Bluetooth or Wi-Fi, as the listing describes. Keep the cables together in a dry place, and lift the unit by its integrated ergonomic handles, which the listing mentions. Recharge the meco 2kwh portable power station after each outage so it is ready for the next one.
Before a long trip or an event, write a short plan. List the devices, their rated wattage and the hours you need them. Charge the meco 2kwh portable power station fully the night before, and carry the cables for AC, car or solar charging in a separate bag so nothing is left behind.
Beyond these general steps, follow the maker’s instructions for any setup detail. Keep the manual within reach, check the cable type before you connect anything, and never use a damaged cable. If a step is unclear, ask us through the contact details in the delivery section below rather than guessing.
Keep a simple record of each outage, noting how long it lasted and which devices you ran. Over several outages, that record will show whether the meco 2kwh portable power station suits your household routine, and which devices deserve priority during a long power cut.
Compatibility and what is in the box
The listing describes several outputs, including AC, car, DC5521, USB-A, USB-A Quick Charge 3.0 and USB-C PD ports. Check each device’s plug, voltage and charging input before you connect it to the meco 2kwh portable power station, and use the cable that suits that device.
The listing lists the following contents: 1 x Meco 2kWh Portable Power Station – 1200W, 1 x AC Charging Cable, 1 x Car Charging Cable, 1 x Solar Charging Cable (MC4 to DC), 1 x User Manual, 1 x Warranty Card.
The listing’s specification table gives the model as Meco P2000 Pro, so check that the model on your unit matches that name. Solar panels are sold separately and are not part of the contents above. The listing gives a solar input of max 500W (12-60V, 10A), so confirm that any panel you buy falls within that range.
Car charging uses the car port described in the listing, which gives its input as 12V/24V, 8A maximum. Use that route when you have time, because the listing gives a full charge of about 20 to 22 hours for the meco 2kwh portable power station. For solar charging, use the solar charging cable named in the contents list with a compatible panel.
Who should buy it in Bangladesh
Home backup is the clearest case. If your household faces load shedding, the listing suggests the meco 2kwh portable power station can keep refrigerators, lights, fans, TVs and Wi-Fi routers running during outages. Recharge the unit from the wall socket between outages, and keep the total load within the continuous 1200W figure.
Remote workers and small offices form the second group. The listing names laptops, communication devices and office equipment as things to keep running. A worker in a Dhaka flat who needs a laptop and communication devices during an outage may find that the meco 2kwh portable power station covers the basics. A small shop that runs a few devices during a short outage is another case where a unit like this can make sense.
Outdoor and job-site users are the third group. The listing describes camping, caravanning, RV trips, fishing, outdoor events and construction sites as use cases. It also lists power tools within the 1200W limit. If your work or hobby needs power where there is no grid access, the meco 2kwh portable power station is designed for that use.
Event and photography users form the fourth group. The listing names sound systems, lighting and camera equipment for outdoor events or shoots. Add up the wattage of each item and check the total against the 1200W figure before you rely on the meco 2kwh portable power station.
The listing also mentions a remote village home in Bangladesh as a place to take the unit. It lists emergency preparedness for natural disasters such as cyclones or floods, where phones, radios and medical equipment need to stay powered, and the meco 2kwh portable power station is positioned for that role. Think about how often you would recharge it, and whether you have a wall socket, solar panels or a car available for top-ups.
Who might look elsewhere? If you only need to charge phones and a few small devices, a different model from our range may suit you better. Read each product page in full to see which unit matches your devices and charging routes.
Alternatives in our store
If you are comparing the meco 2kwh portable power station with other options, these are other portable power stations in our range, linked so you can read their own product pages: SolarStock YOUYO R100 100W 89.6Wh Mini Portable Power Station, which is another portable power station in our range.
You can also consider GearUP Core 300 – Portable Solar Power Station (Inverter 300W, 1004Wh Battery), which is another portable power station in our range.
For the full selection, browse our Power Stations category. Use the category page to compare the options side by side, and open each product page to read the listing in full before you decide.
Warranty and support
Warranty: 2 Years seller warranty.
Delivery, returns and ordering
We deliver all over Bangladesh and you pay cash on delivery. Delivery usually takes 1–3 days inside Dhaka city and 2–5 days outside Dhaka.
You can return it within 7 days of delivery (see our Delivery & Returns policy). Questions before ordering: call 09638054751, message us on Facebook Messenger or email care@gadgetsuperb.com.
Read the full terms on our Delivery & Returns policy page. When you are ready to order the meco 2kwh portable power station, use the contact details above.
Frequently asked questions
What is the meco 2kwh portable power station?
The meco 2kwh portable power station is a portable unit that the listing describes with a 2048Wh LiFePO4 battery and a 1200W pure sine wave AC output. The listing presents it as a backup and outdoor power source.
Who should buy the meco 2kwh portable power station in Bangladesh?
Home backup users, remote workers, small businesses and outdoor or job-site users are the groups the listing describes. Match the unit to the devices you plan to run.
How much energy does the meco 2kwh portable power station store?
The listing gives the capacity as 2048Wh (64V, 32Ah). Compare that figure with the wattage of the devices you plan to run and the hours you need them.
Can the meco 2kwh portable power station run a refrigerator?
According to the listing, it can power a 150W refrigerator for over 10 hours. Actual runtime depends on the fridge, its load and the conditions, so treat this as the maker’s example.
How long does the meco 2kwh portable power station take to charge?
The listing gives about 2 hours from an AC wall outlet, about 4 to 5 hours from solar under optimal sunlight, and about 20 to 22 hours from a car. These are listed figures.
Does the meco 2kwh portable power station work as a UPS?
The listing describes a UPS function with a switchover time under 20ms. It presents the unit as an emergency UPS for sudden power interruptions.
Can the meco 2kwh portable power station be charged with solar?
Yes. The listing gives a solar input of up to 500W, and the solar panels are sold separately.
Does the meco 2kwh portable power station have app control?
According to the listing, it connects by Bluetooth or Wi-Fi for remote control and monitoring through a dedicated mobile app.
What warranty comes with the meco 2kwh portable power station?
Warranty: 2 Years seller warranty.
Can I pay cash on delivery for the meco 2kwh portable power station?
Yes. We deliver all over Bangladesh and you pay cash on delivery.










Reviews
There are no reviews yet.