Microphone Table Stand (NB-35)

The microphone nb-35 table stand is a steel desk stand with an adjustable scissor arm and a clamp that attaches to a table, desk or shelf. According to the listing, it is designed for both professionals and hobbyists, including podcasts, live recordings and music sessions.

• Overview
• Key features
• Specifications
• How to use / set up
• Compatibility and what is in the box
• Who should buy it in Bangladesh
• Alternatives in our store
• Warranty and support
• Delivery, returns and ordering
• Frequently asked questions

An overview of the microphone nb-35 table stand

The maker describes the microphone nb-35 table stand as a sturdy, adjustable and user-friendly stand designed for both professionals and hobbyists. According to the listing, it has a heavy-gauge steel pipe core, which the maker links to durability, stability and minimised vibrations for clear audio capture. The listing also says its flexible arm and adjustable height allow for microphone positioning suited to podcasts, live recordings and music sessions.

For Bangladeshi buyers, the microphone nb-35 table stand suits a desk in a home studio, a small podcast corner, or a classroom or community hall table where a speaker needs the microphone at mouth height. Because the clamp attaches to the edge of a table, it suits a crowded desk where the microphone should stay in one place. The listing says it is designed to hold most standard-sized handheld microphones.

Think about the room before you buy the microphone nb-35 table stand. A table stand suits a microphone that stays at one fixed spot, such as the desk where you record most of your content. Measure the desk depth and the distance to the speaker’s seat first, because a small table leaves little room for a laptop and cables. For background on what a microphone does, see the Wikipedia entry on microphones.

Key features

Each feature below is taken from the listing for the microphone nb-35 table stand, with practical notes for Bangladeshi buyers.

Heavy-gauge steel pipe core

The microphone nb-35 table stand is built around a heavy-gauge steel pipe core. According to the listing, that core supports durability and stability, and the maker says it minimises vibrations for clear audio capture.

A stand that moves less gives your microphone a steadier base, which matters when you record a voice close to the mic for long sessions. The listing also names a high-quality steel frame in its specifications, so steel appears in both descriptions. Treat these points as the maker’s claims, and check how firmly the joints hold when you press the arm gently.

Flexible scissor arm and adjustable height

The microphone nb-35 table stand uses an adjustable black scissor arm stand design made of a high-quality steel frame. According to the listing, the adjustable arms let you set the angle and height so the microphone suits your voice.

The arms can be folded up for carrying and then opened again to the angle you need. If you share the stand between speakers, set the height once for each person and note the position so changes are quick. The listing says the stand can be moved around quickly, which suits a shared room.

Universal mounting clamp

The clamp is described in the listing as a universal mounting clamp that attaches to tables, desks, shelves and counters. It has an adjustable positioning screw and, according to the listing, can clip to any desktop up to 1.7 inches or 4.5 cm thick. Measure your desk edge first, because that single check settles most fit questions.

On the microphone nb-35 table stand, the clamp is the point where the whole stand meets your furniture, so check that the desk edge is firm and flat. A clamp that sits on a firm edge keeps the arm steadier during a recording.

Electrostatic powder finish

The listing says the stand is made of high-quality steel with electrostatic powder spraying technology. According to the maker, this makes the stand more durable and anti-rust compared with normal stands.

In a humid city such as Dhaka, the microphone nb-35 table stand’s finish is worth noting, but treat the anti-rust statement as the maker’s claim. Wipe the stand dry after a damp session, and store it somewhere dry rather than in a damp corner. Dust on the arm joints can make adjustments stiff, so a dry cloth after use is a simple habit.

Folding design for carrying

The listing describes the stand as a folding type that is convenient to carry, with arms that fold up so you can take it with you. This suits a podcaster who records at a friend’s flat, a volunteer who sets up at a community event, or a musician who moves between rehearsal rooms.

For the microphone nb-35 table stand, pack it with the arms folded and keep the clamp screw snug so nothing rattles in your bag. The listing does not give the folded size or weight, so check the stated overall dimensions in the specifications before you plan your bag space. Keeping the stand in a padded bag also protects the joints from knocks during a Dhaka commute.

Suitable settings and clip size

The listing says the stand is designed to hold most standard-sized handheld microphones, and it gives the maximum microphone clip diameter as 1.26 inches. It also names stores, families, stages, studios and broadcasting and TV stations as suitable settings.

The listing also states that the stand is NOT suitable for the Blue Yeti USB microphone or similar heavy microphones, so a heavy USB model falls outside the listed use. For a sound check at a venue, the clamp still needs a firm, flat edge.

Specifications

The table below lists the published details for the microphone nb-35 table stand, taken from our product listing.

These are listed specifications from the product listing.

How to use / set up

Follow the maker’s instructions for the microphone nb-35 table stand, and use the steps below as a simple checklist. The steps are general, because the listing does not give a detailed setup sequence.

1. Choose a flat, firm edge of a desk, table or shelf, and check that its thickness is within the 1.7 inch or 4.5 cm range listed.
2. Open the scissor arms, place the clamp on the edge, and tighten the positioning screw by hand until the clamp grips.
3. Fit your handheld microphone into the clip, keeping in mind the listed maximum clip diameter of 1.26 inches.
4. Adjust the arm angle and height so the microphone sits near your mouth level, then lock the joints.
5. Touch the desk lightly and watch the arm. If it moves, tighten the joints a little more and check again.

Once the microphone nb-35 table stand is set, record a short test clip and listen for stand noise before a full session. Route the microphone cable so it does not pull on the arm, and leave a small loop at the desk edge. If you change speakers, note the new position so you can return to it quickly.

Cable routing deserves a minute of planning. Run the cable along the back edge of the desk, leave slack near the clamp, and secure it so the arm does not pull when you move. Keep the stand away from keyboards and bags on the desk, because a knock on the desk can reach the arm. In a humid room, keep cables dry and do not let them lie in damp corners.

Before every session with the microphone nb-35 table stand, check that the clamp is still tight, the arm holds its height and the cable has enough slack. Load-shedding can interrupt a session, so keep a torch and a charged phone nearby. Keep a dry cloth near the desk for wiping the arm after a humid evening.

Ceiling fans, street traffic and generator noise can all enter a recording, so choose the quietest room you can and close the door during a session. Test the level with a short clip before each recording, and move the stand only when you are not speaking into the microphone.

Routine care is simple. After each session, wipe the arm and clamp with a dry cloth, check the positioning screw, and avoid leaving the stand in direct sun on a hot afternoon. Store it with the arms folded so the joints are not strained. These habits suit the finish the listing describes, but they do not replace the maker’s instructions, so keep those with your order.

Compatibility and what is in the box

According to the listing, the microphone nb-35 table stand is designed to hold most standard-sized handheld microphones. The maximum microphone clip diameter is listed as 1.26 inches.

The listing states that the microphone nb-35 table stand is NOT suitable for the Blue Yeti USB microphone or similar heavy microphones. For heavier loads, the listing suggests buying a separate heavier-duty arm, and it names one in the product text.

Compare your microphone with the listed points for the microphone nb-35 table stand: the clip diameter, the standard handheld type and whether it is a heavy USB model. If you use a microphone that is not named in the listing, the listing does not confirm whether it is suitable, so the safest route is to match the stated limits.

Not confirmed by the listing: how the stand performs with microphone models other than those described above, and whether it fits desk edges thicker than 4.5 cm. The listing also does not set out the full list of items you receive, so ask us what your unit includes.

Who should buy it in Bangladesh

A podcaster recording at a desk in a Dhaka flat is a natural fit for the microphone nb-35 table stand, because the clamp holds the microphone in front of the speaker. Trying two or three sessions helps you judge whether the reach and angle suit how you sit.

A teacher, community organiser or event host who speaks from a table at a school, a local meeting or a small stage may find the stand useful for holding a handheld microphone at speaking height. The listing names stages and broadcasting settings as suitable places, so event use is within what the maker describes.

For home musicians recording vocals, the microphone nb-35 table stand can hold a standard handheld mic in one place while they play. Musicians should check the stand’s maximum clip diameter and confirm that their mic is a standard handheld type.

Check your microphone model and clip size before you order the microphone nb-35 table stand. If your setup uses a heavy USB microphone, this product is not the right match according to the listing.

A simple way to decide is to list how you will use the stand. Write down where it will sit, how often you will move it, which microphone you own and who will sit in front of it. If the answers point to a desk, a standard handheld microphone and occasional moves, the microphone nb-35 table stand fits the brief set out in the listing.

If you are buying for a family member who records at home, think about who will set the height. A stand that suits one speaker may need adjusting for the next, so the adjustable arms matter as much as the clamp.

Alternatives in our store

If the microphone nb-35 table stand does not suit your setup, you may want to look at other stands and tripods in our range. Our other options include JMARY KP-2206 Camera And Phone Selfie Stick Tripod, another camera and phone tripod in our range; Jmary MT29 Portable Mini Tripod, another portable tripod in our range; Jmary KP-2207 Portable Aluminum Tripod, another tripod in our range; and YUFENG-3388 Professional Foldable Heavy-Duty Tripod, another foldable tripod in our range.

You can browse the whole collection in our Tripods & Stands category.

A table clamp and a floor tripod solve different problems. Use a table clamp for a desk you control, and look at a tripod when you need the microphone higher from the floor. The alternatives above are tripods and stands in our camera and vlogging range, so read each product page for its own listed details.

Warranty and support

Warranty: 7 Days seller warranty.

Delivery, returns and ordering

When you order the microphone nb-35 table stand, the following store policy applies.

We deliver all over Bangladesh and you pay cash on delivery. Delivery usually takes 1–3 days inside Dhaka city and 2–5 days outside Dhaka. You can return it within 7 days of delivery (see our Delivery & Returns policy). Questions before ordering: call 09638054751, message us on Facebook Messenger or email care@gadgetsuperb.com.

If your address is outside Dhaka, allow the longer outside-Dhaka timing when you plan a recording date. Keep your phone reachable on delivery day so the courier can confirm the address.

If you are ordering for someone else, share the delivery timing with them and ask them to keep their phone available. Our team can answer delivery questions before you place an order, so call or message us early if you need the stand for a planned event date.

Frequently asked questions

What is the microphone nb-35 table stand?

According to the listing, it is a steel desk stand with an adjustable scissor arm and a universal clamp. The maker describes it as sturdy, adjustable and user-friendly.

Who is the microphone nb-35 table stand for?

The listing says it is designed for both professionals and hobbyists, including podcasts, live recordings and music sessions. It is also listed as suitable for families, studios, stages and broadcasting settings.

Does the microphone nb-35 table stand fit a Blue Yeti microphone?

No. According to the listing, the microphone nb-35 table stand is NOT suitable for the Blue Yeti USB microphone or similar heavy microphones. The listing points to a separate heavier-duty arm for heavy loads.

What is the maximum clip diameter for the microphone nb-35 table stand?

The listing gives the maximum microphone clip diameter as 1.26 inches. Compare that figure with the clip on your handheld microphone.

How thick a desk can the clamp grip on the microphone nb-35 table stand?

According to the listing, the clamp can clip to a desktop up to 1.7 inches or 4.5 cm thick. It has an adjustable positioning screw to hold it in place.

Is the microphone nb-35 table stand made of metal?

Yes, the listing says it is made with metal, including a heavy-gauge steel pipe core and a high-quality steel frame. The maker also lists an electrostatic powder finish.

Does this stand fold for carrying?

The listing describes it as a folding type, with adjustable arms that fold up for carrying. Check the stated overall dimensions in the specifications before you plan storage.

What warranty is listed for this stand?

The listed warranty is 7 Days, as shown in the specifications above.

How long does delivery take?

Delivery usually takes 1–3 days inside Dhaka city and 2–5 days outside Dhaka. Plan your recording date with the longer timing if you are outside Dhaka.

Can I return the microphone nb-35 table stand?

Yes, you can return it within 7 days of delivery. See our Delivery and Returns policy for details.

Is cash on delivery available for the microphone nb-35 table stand?

Yes, we deliver all over Bangladesh and you pay cash on delivery. Call 09638054751 or email care@gadgetsuperb.com if you have questions before ordering.