360 Degree Mobile Holder With Cold Shoe Mount For Extra Microphone Or Led Light

The 360 Degree Mobile Holder is a phone clip with a pivoting arm and a cold shoe mount for an extra microphone or LED light, according to the listing. It is aimed at vloggers, content creators and home workers in Bangladesh who want a flexible phone mount for tripods, selfie sticks and desk setups.

• What the 360 Degree Mobile Holder Is
• Key features
• Specifications
• How to use / set up
• Compatibility and what is in the box
• Who should buy it in Bangladesh
• Alternatives in our store
• Warranty and support
• Delivery, returns and ordering
• Frequently asked questions

What the 360 Degree Mobile Holder Is

According to the listing, the 360 Degree Mobile Holder is a 360-degree mobile vlogging holder with a cold shoe mount for an extra microphone or LED light. The maker lists it as a phone clip on a pivoting arm that turns to help you find the frame you need. The product name uses the term cold shoe mount, while the listing body describes a built-in hot-shoe, so read the two terms together.

In practical terms, a holder like this is a mounting accessory that sits between your phone and a tripod or similar support, rather than a camera in its own right. The value of the product therefore depends on the support you already own or plan to buy. A buyer who already has a tripod with a 1/4 screw connection will have a clearer idea of how it fits into their set-up.

For Bangladeshi buyers, the appeal is practical. Many people film on a phone because it is already in their pocket, and the 360 Degree Mobile Holder lets them set up a fixed frame without holding the device for long periods. The listing says it can mount any mobile phone, with or without a case, so a protective cover does not have to come off first. The maker also lists desktop stand use, which suits students and home workers who record lessons at a table.

Key features

360-degree rotation on a pivoting arm

The listing says the 360 Degree Mobile Holder supports 360-degree rotation through a pivoting arm. According to the listing, you can rotate the phone into portrait mode (vertical) or landscape mode (horizontal) without taking it out of the holder. That matters when you switch between a tall frame for short social clips and a wide frame for a conversation or tutorial. Use the arm to find the frame before you start recording, then check that the phone is secure before you press record.

Adjustable clamp for a wide range of phones

The listing gives an adjustable mobile screen size from a minimum of 58mm to a maximum of 105mm. It also says the clamp expands from 5.0cm to a maximum of 10.0cm wide, which the maker describes as compatible with most mobile phones in the market. Measure your phone’s screen and the width of the case you normally use, then compare them with these figures. A real phone in hand is the best way to judge whether the 360 Degree Mobile Holder suits your handset.

Built-in hot shoe for a microphone or fill light

The listing describes a built-in hot-shoe that can mount a fill light or microphone, which it says provides more extended functions when shooting. It also says the hot shoe is compatible with most microphones or flashlight. Background reading on microphones can help you understand the connection types you may meet. Keeping the phone and one extra accessory on the same support can make a small rig easier to manage during a shoot.

Mounting to tripods, selfie sticks and rigs

According to the listing, the holder is compatible with all Selfie Stick or Gorillapod with 1/4 screws. It also says you can mount any mobile phone to a tripod, monopod, video slider, ring light, stabiliser, handgrip or similar item that needs a universal 1/4-20 screw-on connection. This makes the 360 Degree Mobile Holder useful if you already own a rig and want to add a phone to it. The listing gives two installation options, which are covered in the set-up section below. Check that your support uses a 1/4 screw before you buy.

Vlogging and desktop use

The listing calls the 360 Degree Mobile Holder a 360-degree mobile vlogging holder and says you can also use it as a desktop stand. For a vlogger, one accessory can serve a desk setup as well as a handheld or tripod setup. The listing describes it as a must-have for any mobile vlogger, which is the maker’s sales wording rather than a measured result. A content creator in Dhaka who records short clips after work may find a desk or tripod mount more useful than a handheld grip.

Specifications

The table below sets out the specifications for the 360 Degree Mobile Holder as they appear in the product listing.

These are listed specifications from the product listing.

How to use / set up

Setting up the 360 Degree Mobile Holder is simple once you know which of the two installation options suits your rig. Start by choosing your support, whether that is a tripod, a selfie stick or another item with a 1/4 screw connection. Before first use, charge any powered accessory fully, such as a light or microphone you plan to add, and follow the maker’s instructions for those parts.

Option one: screw the holder directly to the tripod using the pivoting arm, which the listing says can rotate 360 degrees. This keeps the clip and the arm together, so you only need to adjust the arm to set the angle.

Option two: remove the clip from the pivoting arm and mount only the clip on a tripod. Use this approach when you want the clip alone on your stand, for example when the stand already has its own head. Keep the removed arm somewhere safe so it is not lost between shoots.

Next, open the clamp of the 360 Degree Mobile Holder within the listed range of 5.0cm to a maximum of 10.0cm, place your phone in the clamp, and tighten it so the phone sits square. Adjust the pivoting arm to switch between portrait and landscape without removing the phone from the holder. Check the grip before you start recording, and make sure the connection to the support is firm so nothing moves during a take.

Repeat the check each time you change the position of the 360 Degree Mobile Holder, especially when you move between a desk and a handheld setup. A short test on the spot is quicker than discovering a loose grip halfway through a recording.

Before every shoot, run through a short checklist: the support is level, the arm is tight, the clamp is closed on the phone, and any microphone or light on the hot shoe is seated firmly. This takes only a moment and avoids most of the problems that spoil a take. Once you have a routine, the set-up becomes quick enough to repeat for every short clip.

Care advice for the 360 Degree Mobile Holder is general rather than listed by the maker. After a shoot, wipe the clamp and arm with a dry, soft cloth, especially if you have been filming outdoors or in a humid room. Keep the holder in a dry place away from direct sun when you are not using it, and store it apart from sharp tools that could scratch the finish.

Check the screw on the 360 Degree Mobile Holder each time you mount it to a new support, and tighten it by hand before you reach for any tool. Keep the thread clean of grit, because dirt can make a connection feel loose. During load-shedding, charge any powered accessories in advance so a cut in power does not stop your shoot.

Compatibility and what is in the box

According to the listing, the 360 Degree Mobile Holder is compatible with all Selfie Stick or Gorillapod with 1/4 screws. It is also listed as usable with any mobile phone, with or without a case, and with a universal 1/4-20 screw-on connection. The hot shoe is listed as compatible with most microphones or flashlight.

The listing includes a package list, but this page does not restate those items. Ask us to confirm the contents before ordering, so you know exactly what to expect when your delivery arrives.

Not confirmed by the listing: specific tripod, selfie stick, microphone or LED light models, and whether every phone case will open the clamp fully. Compatibility with the 360 Degree Mobile Holder beyond the terms printed in the listing is not stated, so treat it as open until you check.

If your phone case is thick, measure the phone and the case together against the clamp range before you assume it will fit. The listing gives the clamp range in centimetres, so a simple tape measure is enough for the check. Note the measurement somewhere you can find it when you order.

For background on microphone types, read the Wikipedia entry on microphones, which is a general reference rather than a maker’s source.

Who should buy it in Bangladesh

A solo vlogger filming short videos in Dhaka, who already owns a tripod or selfie stick with a 1/4 screw connection, is the clearest match. The 360 Degree Mobile Holder adds a flexible phone mount without buying a whole new rig. Check the compatibility section first to make sure the threads and the support will work together.

A home worker or student who records lessons, demonstrations or short tutorials can use the 360 Degree Mobile Holder as a desktop stand, as the listing says. It may suit a corner of a room where space is limited, because the arm lets you find a frame without moving furniture.

Buyers who want to add a microphone to a phone rig may find the built-in hot shoe on the 360 Degree Mobile Holder useful. Check the mount type of the accessory yourself before you buy it, since the listing describes the hot shoe only in general terms.

A small shop owner in Chattogram who posts product videos on social media can set the 360 Degree Mobile Holder on a tabletop tripod and film items against a plain background. This is a use the listing supports only in general terms, so check the framing before each session.

A teacher in Sylhet who records revision videos at home may find the arm useful for switching between a close frame and a wider one. Charge your phone before a long session, and keep the support on a firm surface.

Someone filming a family event, a small celebration or a community meeting may want a phone mount that keeps the frame steady without a helper. The clamp and pivoting arm let you set the frame in portrait or landscape before the event starts. Set up at home first, so there are fewer surprises on the day.

If you need a support for a camera body rather than a phone, the 360 Degree Mobile Holder is described in the listing as a phone holder, so look at other supports first.

People who film outdoors in humid conditions should keep the holder dry between shoots, which is a general care habit rather than a listed feature of the product.

Alternatives in our store

If the 360 Degree Mobile Holder is not the right fit, you may want to look at other supports in our range. The JMARY KP-2206 Camera And Phone Selfie Stick Tripod is listed in our Tripods & Stands category. The Jmary MT29 Portable Mini Tripod is also in that category. The Jmary KP-2207 Portable Aluminum Tripod and the YUFENG-3388 Professional Foldable Heavy-Duty Tripod are further options from the same range. For the full selection, browse Tripods & Stands. Compare each option with the 360 Degree Mobile Holder against the support and phone you already have.

Warranty and support

Warranty: 7 Days seller warranty.

Delivery, returns and ordering

Ordering the 360 Degree Mobile Holder is straightforward. We deliver all over Bangladesh and you pay cash on delivery.

Delivery usually takes 1–3 days inside Dhaka city and 2–5 days outside Dhaka. Outside Dhaka, allow for the 2–5 day window when you plan a shoot date.

You can return it within 7 days of delivery (see our Delivery & Returns policy). Read the policy before you place your order, so you know the terms that apply to any return.

Questions before ordering: call 09638054751, message us on Facebook Messenger or email care@gadgetsuperb.com.

When you are ready, add the item to your order through the store’s usual channel, then confirm your full name, delivery address and phone number. Because payment is cash on delivery, keep the amount ready for the courier. If you need to change the order before it is sent out, contact us by phone, Facebook Messenger or email as soon as possible.

If you are ordering for a family member or friend in another district, agree the delivery address and a reachable phone number with them first. Keep the order details to hand when you call, and ask about the 360 Degree Mobile Holder before you confirm.

Frequently asked questions

Is the 360 Degree Mobile Holder compatible with phone cases?

Yes, according to the listing, the holder can mount any mobile phone, with or without a case. Check that your case does not stop the clamp from opening within the listed range of 5.0cm to 10.0cm. If your case is thick, measure the phone and the case together before you order.

What phone sizes does the 360 Degree Mobile Holder fit?

The listing gives an adjustable mobile screen size from 58mm to 105mm and a clamp that expands from 5.0cm to max. 10.0cm wide. Measure your phone before you order, since the listing does not name specific handset models. Compare those figures with the width of your usual case as well.

Can I use the 360 Degree Mobile Holder with a microphone?

The listing says the built-in hot shoe is compatible with most microphones or flashlight, so the holder can carry an extra accessory of that kind. Specific microphone models are not confirmed by the listing. Check the mount type of your own accessory before you buy it.

How do I mount the 360 Degree Mobile Holder to a tripod?

The listing gives two options: screw the holder directly to the tripod with the pivoting arm, or remove the clip from the pivoting arm and mount only the clip on a tripod. Follow the maker’s instructions for the option you choose. Tighten the connection by hand before you start recording.

Can the 360 Degree Mobile Holder rotate between portrait and landscape?

Yes, the pivoting arm lets you rotate the phone into portrait (vertical) or landscape (horizontal) mode without taking it out of the holder, according to the listing. Adjust the arm before you start recording so the framing is set. Check that the phone is secure afterwards.

Does the 360 Degree Mobile Holder work with a selfie stick?

The listing says it is compatible with all Selfie Stick or Gorillapod with 1/4 screws. Check that your selfie stick has a 1/4 screw connection before you buy. A quick check at home is the simplest way to be sure the two parts work together.

Is the 360 Degree Mobile Holder suitable for vlogging in Bangladesh?

The listing describes it as a 360-degree mobile vlogging holder, so it is aimed at vloggers and creators filming at home or on the move. It can also be used as a desktop stand, which suits home-based lessons and tutorials. Choose the support that matches how you film most often.

What warranty comes with the 360 Degree Mobile Holder?

Warranty: 7 Days seller warranty. For questions, call 09638054751, message us on Facebook Messenger or email care@gadgetsuperb.com. Ask us about the warranty before ordering if anything is unclear.

How long does delivery take for the 360 Degree Mobile Holder?

Delivery usually takes 1–3 days inside Dhaka city and 2–5 days outside Dhaka. We deliver all over Bangladesh, so the same ordering process applies wherever you live. Plan your shoot date with these windows in mind.

Can I return the 360 Degree Mobile Holder if it does not suit me?

You can return it within 7 days of delivery. See our Delivery & Returns policy at https://gadgetsuperb.com/delivery-returns/ for the full terms. Read the policy before you place your order so you know what to expect.

Do I pay for the 360 Degree Mobile Holder on delivery?

Yes, you pay cash on delivery, and we deliver all over Bangladesh. Have the amount ready when the courier arrives. Ask us to confirm the delivery area before you place the order.

How should I store the 360 Degree Mobile Holder between shoots?

Keep it in a dry place away from direct sun, with the arm in its usual position so the pivot is not under strain. Wipe the clamp with a dry, soft cloth after use. Store it apart from sharp tools that could scratch the finish.