Ulanzi WM-10 Wireless Clip-on Microphone for iphone

If your iPhone videos sound hollow, distant, or drowned in room echo, the camera is rarely the problem — it is the tiny microphone buried inside your phone. The Ulanzi WM-10 is a wireless clip-on microphone for iPhone that puts a real lavalier inches from your mouth: clip it to a collar, and your voice comes through clear and present while background noise stays in the background. For iPhone creators on a budget, the ulanzi wm-10 is the cheapest-looking upgrade that makes your videos sound professional — and this listing is the Lightning variant, made for iPhones with a Lightning port.

There is no app to install, no Bluetooth pairing, and no adapter to lose. Push the Lightning receiver into your iPhone, power on the ulanzi wm-10 transmitter, and record — the pair links automatically over 2.4GHz.

One thing before the details, because it is the question every buyer asks: this is the Lightning variant of the ulanzi wm-10, for iPhones and iPads with a Lightning port (iPhone 14 series and older). If your iPhone has USB-C (iPhone 15 and later), or you use Android, you need the WM-10 Type-C variant instead — the receivers are not interchangeable. This page is written from the verified research notes for this microphone — the store’s live product page fetched in October 2026. Every number below comes from those verified notes; nothing here is estimated, and anything not confirmed is stated as omitted rather than guessed.

Made for Lightning iPhones

Setup is three steps: plug the Lightning receiver into your iPhone, power on the transmitter, press record. No app, no Bluetooth pairing, no adapter — the 2.4GHz link pairs automatically when the receiver is seated. That matters when you hand the mic to a guest: anyone can be recording in under a minute.

The Lightning receiver draws its power straight from the phone, so it never needs charging — the ulanzi wm-10 has only one battery to manage, and it lives in the transmitter. Because the link is plug-and-play rather than Bluetooth, your iPhone treats the mic like a wired input. Record in the camera app, a vlog app, or any third-party recorder — the ulanzi wm-10 just works.

This listing is for the Lightning variant only. The transmitter is identical across both WM-10 variants, but the receiver is not: the Lightning plug on this model will not fit a USB-C port, and the Type-C receiver will not fit a Lightning port. Check your phone’s port before you order — the Lightning connector is the small flat 8-pin plug found on iPhone 14 and older; iPhone 15 and later use USB-C.

10m of Wireless Freedom

The 2.4GHz link holds up to 10m between the transmitter and the receiver — enough to step back from the camera for full-body shots, walk-and-talk vlogs, product demos, and interviews where the speaker stands across the room.

Ten metres is the manufacturer-listed figure for clear line-of-sight; in real rooms, walls and bodies eat range, so keep the phone reasonably close for critical takes. The range infographic above is an illustrative reconstruction of that wireless freedom, not a photograph.

Your Voice, Minus the Background

The transmitter uses an omnidirectional capsule that picks up sound in a full 360° — forgiving when the mic shifts on your collar mid-take. Three levels of noise reduction ride on top: short-press the side button to cycle through them, and the LED flashes the active level. Level by level, the ulanzi wm-10 strips more background out of the recording — street hum, room echo, a fan running in the corner — while keeping your voice up front.

The ≥70dB signal-to-noise ratio keeps the underlying hiss quiet, and the 20Hz–20KHz response covers the full range of the human voice. Be honest about what noise reduction can do: it reduces steady background noise; it does not erase a loud event happening right next to you. Pick the level that keeps your voice natural — the highest level can sound aggressive on a quiet indoor take.

Clip It On and Forget It

At just 13.6g for the complete system — an 8.5g transmitter and a 2.7g receiver — the ulanzi wm-10 is one of the lightest wireless mics you can clip to a shirt. The transmitter is a slim black stick, 59 × 20 × 16.7mm, with a mic grille on top, a side button, a spring-loaded back clip, and a tiny LED indicator. Squeeze the clip, slide it onto a collar or lapel, and the mic disappears into your outfit.

The furry windmuff slips over the mic end for outdoor recording — wind is the fastest way to ruin a take, and the muff is the simplest fix. The parts infographic in the next section shows the windmuff and the back clip up close.

4.5 Hours on One Charge

The transmitter runs up to 4.5 hours on a single charge from its 70mAh (0.26Wh) cell — enough for a full shooting day or several days of short takes. When it runs low, the included Type-C cable tops it up from any phone charger or power bank.

The receiver needs no charging at all: it draws its power from the phone it is plugged into. That asymmetry is the practical point — the ulanzi wm-10 has only one battery to manage, and it is the one that lasts most of a working day.

Inside the WM-10

There is not much room inside a 59mm stick, but the ulanzi wm-10 fits three essentials: the omnidirectional capsule up top, the 70mAh cell in the middle, and the 2.4GHz radio board at the base that holds the 10m link. The x-ray render above is an illustrative reconstruction of that layout — not a photograph of disassembled hardware.

The engineering choices are all about disappearing: 8.5g in the transmitter, 2.7g in the receiver, 13.6g total. Nothing protrudes, nothing dangles.

The parts infographic above calls out the two parts you will touch most: the furry windmuff that tames outdoor wind, and the spring-loaded back clip that holds the transmitter to a collar or lapel. Like the x-ray, it is an illustrative reconstruction of the verified parts — not a packing photograph.

Specifications

All figures are taken from the verified research notes for this microphone — the store’s live product page fetched in October 2026. The parts and x-ray renders above are illustrative reconstructions of the manufacturer’s listed parts and figures, not photographs.

What’s in the Box

The box holds the transmitter, the Lightning receiver, a Type-C charging cable, and the user manual. The furry windmuff is included for outdoor recording, per the verified research notes. If the exact contents matter to you, confirm with the store before ordering.

Two honest exclusions: there is no spare receiver — the Lightning receiver in the kit shot above is the one you get — and no charging brick, since the included Type-C cable charges the transmitter from any phone charger or power bank you already own.

What 20Hz–20KHz and ≥70dB SNR Mean for Phone Video

The two audio figures in the specifications table explain why the ulanzi wm-10 changes how an iPhone video sounds. Frequency response of 20Hz–20KHz covers the full range of the human voice — the warmth at the bottom of a sentence and the consonant detail at the top that makes speech easy to follow on small phone speakers. Nothing you say in a vlog, an interview, or a product demo falls outside it.

The ≥70dB signal-to-noise ratio is the quietness figure: your voice sits roughly seventy decibels above the microphone’s own electronic noise, so the gaps between sentences record as silence instead of hiss. The ulanzi wm-10 pairs that with a 360° omnidirectional capsule, which picks up sound evenly from every direction — forgiving when the mic shifts on your collar mid-take, and indifferent to which way you turn your head while you talk. Close to your mouth on a collar, inches from the source instead of across the room like the phone’s own microphone, is where the clarity in your videos actually comes from.

From Pocket to Posted: A Creator’s Routine

The routine is short because the setup is. Receiver into the iPhone, transmitter powered on, record — the 2.4GHz link pairs automatically, with no app and no Bluetooth pairing, so anyone you hand the ulanzi wm-10 to can be recording in under a minute. Clip the 8.5g transmitter to a collar, and the complete 13.6g system effectively disappears for the rest of the shoot.

Outdoors, two habits carry the day. Slip the furry windmuff over the mic end before you start — wind is the fastest way to ruin a take, and the muff is the simplest fix. Then choose your noise-reduction level with a short-press of the side button: the LED flashes the active level, and the honest guidance is to pick the level that keeps your voice natural, because the highest level can sound aggressive on a quiet indoor take. Street hum and room echo belong to the higher levels; a calm room usually wants a lighter touch.

Battery management is one item long. The transmitter runs up to 4.5 hours from its 70mAh cell and tops up over the included Type-C cable from any phone charger or power bank — an easy between-shoots habit. The Lightning receiver never needs charging at all, because it draws its power straight from the phone. One battery to watch, up to 10m of wireless freedom to shoot in, and nothing else to carry: that is the whole routine, from pocket to posted video.

Keeping the kit together is the last habit. The transmitter, the Lightning receiver, the Type-C charging cable, the manual, and the windmuff are the whole system — small enough to live in a jacket pocket or the corner of a camera bag, so the mic is with you on the shoots you did not plan. A wireless microphone only upgrades your videos on the days it is actually there.

Why Buy From Gadget Superb

Order the ulanzi wm-10 from Gadget Superb with cash on delivery anywhere in Bangladesh — pay in cash when the parcel arrives, with no advance payment, card details, or OTPs ever asked. Delivery takes 1–3 working days inside Dhaka (৳70) and 2–5 working days outside Dhaka (৳120). Every order carries 7-day easy returns: keep the mic in original condition with box and accessories, and start a return with your order number via hotline 09638054751, care@gadgetsuperb.com, or Messenger.

Explore the full Audio Electronics collection or compare wireless microphones for the right fit. Ulanzi is a global creator-gear brand — see the official site at ulanzi.com.

Frequently Asked Questions

What exactly is the Ulanzi WM-10 — and how do I know this is the Lightning variant?

A single wireless lavalier system: one clip-on transmitter, one plug-in receiver. This listing is the Lightning variant of the ulanzi wm-10 — the receiver ends in a Lightning plug with gold contacts, exactly as shown in the gallery and kit photos on this page. If the receiver in the photos were the flat USB-C type, this would be the Type-C listing instead.

Will this work with my iPhone? What if I have an iPhone 15 or an Android phone?

Yes, if your iPhone has a Lightning port — iPhone 14 series and older, plus Lightning iPads. Push the receiver in, power on the transmitter, and record. If your iPhone has USB-C (iPhone 15 and later), or you use Android, buy the WM-10 Type-C variant instead — the receivers are not interchangeable.

Is the Ulanzi WM-10 an original Ulanzi product?

This listing is for this model as catalogued by Gadget Superb under the Ulanzi brand. The store does not claim official-distributor status for any brand it carries. If authenticity documentation matters to you, message the store on Messenger or email care@gadgetsuperb.com before ordering.

Does it need an app or Bluetooth pairing?

No. The ulanzi wm-10 links over 2.4GHz, not Bluetooth — plug the receiver in and the transmitter pairs automatically, with no app and no pairing dance. That also means it does not appear in your phone’s Bluetooth list, which is normal.

How far can I go from the camera?

The manufacturer lists up to 10m of wireless range in clear line-of-sight. Indoors, walls and bodies eat range, so keep the phone reasonably close for critical takes. For walk-and-talk vlogs and interviews across a room, the ulanzi wm-10 stays comfortably inside its range.

How does the 3-level noise reduction work?

Short-press the transmitter’s side button to cycle the three noise-reduction levels; the LED flashes the active level. Higher levels strip more background noise but can sound aggressive on a quiet take.

How long does the battery last, and how do I charge it?

The transmitter runs up to 4.5 hours per charge from its 70mAh cell — top it up over Type-C from any phone charger or power bank. The Lightning receiver draws power from the phone and never needs charging.

Is the furry windmuff included?

The verified research notes list the furry windmuff as included — the accessory made for outdoor recording in wind. If the exact contents matter, confirm with the store before ordering.

Does the Ulanzi WM-10 come with a warranty?

a 7-day store warranty

How long does delivery take, and what are the charges?

Inside Dhaka, delivery costs ৳70 and takes 1–3 working days; outside Dhaka, it costs ৳120 and takes 2–5 working days. These are estimates, not guarantees. It ships once you place a cash-on-delivery order.

How does cash on delivery work? Can I check the mic before paying?

Cash on delivery means you pay the courier in cash when the parcel arrives. Gadget Superb never asks for advance payment, card details, OTPs, or mobile-banking PINs. Couriers generally do not allow opening a parcel before payment, so test your ulanzi wm-10 after the courier leaves and contact the store within the 7-day return window if anything is wrong.

What is the price of the Ulanzi WM-10 in Bangladesh?

The current price is shown on the product page and can change during sales, so no figure is quoted here. Check the live ulanzi wm-10 page for today’s price — that is what you pay in cash on delivery, plus the standard delivery fee.

Which apps does the ulanzi wm-10 work with?

Because the link is plug-and-play rather than Bluetooth, your iPhone treats the ulanzi wm-10 like a wired input — so it works in the camera app, a vlog app, or any third-party recorder you already use. There is no companion app to install and nothing to select in a Bluetooth list; plug the Lightning receiver in, power on the transmitter, and the microphone is simply your phone’s input.

My voice sounds too processed — what should I change?

Lower the noise-reduction level. Short-press the side button to cycle the three levels (the LED flashes the active one) and step down until your voice sounds natural again: higher levels strip more background noise, but the highest can sound aggressive on a quiet indoor take. The ulanzi wm-10 gives you three levels precisely so the fix is a button press, not a new recording.

Can two people record with one WM-10 kit?

This kit is a single-transmitter system — one clip-on transmitter and one Lightning receiver — so it mics one person at a time. Two speakers can pass the transmitter between them for a simple interview, but if both voices need to be live at once, each person needs their own kit. What the single WM-10 does offer is genuinely feather-light: 13.6g total, so a second kit adds almost nothing to a camera bag.